SKA series water ring vacuum pump features and applications

1. Use and application range

SKA series vacuum pump is suitable for removing gas and water vapor, suction pressure reaches 33mbar Absolute pressure (97% vacuum) When the vacuum pump in the suction pressure below 80mbar long-term work, should be connected to the protection of the pump to protect the pump For protection, with air jets (see attached table) Suction pressure up to 10 mbar, ejector can be mounted directly on the vacuum pump. Used as a compressor, the pressure up to 0.26MPa (absolute pressure).

Water ring vacuum pumps and compressors are widely used in petrochemical, pharmaceutical, food, sugar industry and other fields, as in the process of work, the gas compression process is isothermal, so in the compression and pumping flammable gas, Not prone to danger, its application is more extensive.

2. Structure and characteristics

Pump coaxial coaxial design, space-saving, easy to install;

The mechanical seal as a standard configuration, eliminating the leak, easy maintenance;

Smooth operation, the noise can be as low as 62 dB;

A uniform corrosion-resistant design, bronze impeller to improve the corrosion resistance of the pump, stainless steel is more suitable for more demanding applications;

The unique, flexible vent design eliminates over-compression and ensures SKA is the most efficient within its performance envelope.

Performance curve

4. Selection example

① design point parameters

Inspiration volume V = 100m3 / h

Suction pressure P1 = 40 mbar

② other parameters with the standard state (see note)

Select the curve closest to Design Point 1

Note: This performance curve is obtained with saturated air at 20 ° C, working fluid temperature 15 ° C and discharge pressure 1013 bar. Performance allowable difference of + 10%.

A floating head heat exchanges is a type of [shell and tube",as shown in the name of it, in this design, one end of the tubesheet is fixed to the shell, while the other one can [float" freely inside the shell.

It has several components, including tubes, tube sheets, shell and shell-side nozzles, tube-side channels and nozzles, channel covers, a pass divider and baffles.

Floating Head Heat Exchanger Advantages

1.Tube bundle can be pulled out to facility cleaning the tubeside and shellside.

2.Temperature difference between two medium is not limited.

3.The Heat Exchanger can be operated under high temperature and high pressure, the average temperature is less than or equal to 450℃,and pressure is less than or equal to 10MPa.

4.This kind of heat exchanger is suitable for the serious scaling occasion.

5.This kind of heat exchanger is suitable for the easy corrosion occasion.

If you have any questions, please contact with us directly, Pullylon has been manufacturing the Storage Tank for more than 20 years, and our products have been exported to many factories, such as US, Russia, Singapore, Australia, Malaysia and so on. Welcome you can visit our Factory. For inquiry, Please send mail directly to us.

Floating Head Heat Exchanger

Floating Head Heat Exchanger,Heat Exchanger Water Heater,Floating Head Tube Heat Exchanger,Customize Floating Head Heat Exchanger

Shandong Pulilong Pressure Vessel Co.,Ltd , https://www.pullylon.com