Chemical pumps are widely used in all fields of the chemical industry, and have important applications in the chemical, metallurgical, pharmaceutical and foil industries. Chemical pump also rely on centrifugal force to transport materials, the working principle is as follows:
Before the chemical pump works, the pump body and the feed pipe must be full of liquid to form a vacuum state. When the impeller rotates rapidly, the impeller causes the liquid to rotate rapidly. The rotating liquid material flew from the impeller under the centrifugal force, After the water inside the pump is thrown out, the central part of the impeller forms a vacuum area. Liquid material in the atmospheric pressure through the pipe network pressure into the feed tube. This cycle endless, we can achieve continuous delivery.
Before the chemical pump is started, the pump casing is filled with the liquid to be transported. After starting, the impeller is driven by the shaft to rotate at a high speed, and the liquid between the blades must also rotate along with it. Under the action of centrifugal force, liquid is thrown from the center of the impeller to the outer edge and gains energy, leaving the outer edge of the impeller to enter the scroll casing at a high speed.
In the volute, the liquid due to the gradual expansion of the slowing down, but also part of the kinetic energy into static pressure, and finally to a higher pressure into the discharge pipe, to the required place. When the liquid flows from the impeller center to the outer edge, a certain vacuum is formed in the center of the impeller. Since the pressure above the liquid level in the sump is greater than the pressure at the inlet of the pump, the liquid is continuously pressed into the impeller. Visible, as long as the impeller constantly rotating, the liquid will be continuously inhaled and discharged.
Folder and Slitter Machine is widely used before forming.
Hangzhou Yibo Machinery Co.,Ltd, founded in 2003 is an professional machinery manufacturer for design, produce, service and trade.
Yibo's main products are Cold Roll Forming Machine, such as purlin Forming Machine , guardrail forming machine, roof panel forming machine, wall panel forming machine, tile forming machine, floor Deck Forming Machine, Roof Seaming Machine and so on; steel coil process machinery such as Slitting Line , Cut to Length Line , combined line and so on; accessory Stamping Parts such as roof supporting clips, connect bar, water bar and so on.
Folder and Slitter Machine
Sheet Folding Machine,Metal Folding Machines,Slitter Folder,Folder and Slitter Machine
HANGZHOU IUWON TECHNOLOGY CO,. LTD. , https://www.iuwon.com
没有评论:
发表评论