Diaphragm metering pump working principle

(1) the use of diaphragm before and after the action of the diaphragm and the pump head changes between the ball valve up and down movement to form a vacuum adsorption and push phenomenon to achieve the purpose of liquid delivery.

① When the diaphragm is pulled backwards, the outlet ball valve falls tightly close to the ball seat, the inlet ball valve rises upward due to the vacuum generated between the diaphragm and the pump head, and the liquid is sucked up.

② When the diaphragm forward push, the ball valve seat and seat airtight, so that the liquid will not pass, and the outlet forward due to the diaphragm push the ball valve open, the liquid spit

(2) by the above principle of action we can simply know the diaphragm, pump head, ball valve ball seat caused by any one of the factors of leakage can not achieve the purpose of delivery, or abnormal flow, usually resulting from the failure of the four main components for:

① ball seat and ball valve can not be airtight

② entrance, exit foreign body obstruction

③ damaged diaphragm

Therefore, if the liquid is transported abnormally, the handling in this respect should be resolved. The factors that cause the above situation are too numerous to mention. We can only determine the condition of piping, fittings and operation at that time.

We are professional manufacturer of Injection Moulding Machine from China,PVC Injection Moulding Machine adopts special PVC screw and barrel to suitable for PVC material, this PVC Injection Molding Machine is sutiable for PVC pipes and errows.

1.Benchtop full-auto pvc injection molding machine adopt pp material special screw , improved plasticizing effciency and reduce plasticizing temperature, effectivly improved the bottle preform cintraction deformation and improved the bottle blowing transparency.

2. increase the ejecting force and ejection stroke, adapt to the requirements of the special bottle prefrom ejection.

3. choose synchronous pressure maint ainting system, improve product pass percent, and reduced themaint aining time.

4. with the hot runner control interface , conventent for the mould connection.

5. the mould claping part adopts the full sedling rype,coonform to the pharmaceutical environmental requirements.

6. the machine specifications are complete,adapt to a variety of different bottle preform

DO BEST,TO BE GOOD

PVC Pipe Injection Molding Machine

PVC Pipe Injection Molding Machine,Plastic Injection Machine,PVC Special Injection Moulding Machine,PVC Injection Molding Machine

BUEN MACHINERY CO.,LTD , http://www.buenmachine.com