Pneumatic double diaphragm pump applications

With the rapid development of all walks of life in our country, many fields have undergone tremendous changes, but in some areas we still have no way to do more hello handling, such as in the harsh areas such as construction Due to the large amount of impurities and complex components in the sewage, the pipeline is easy to be blocked, so that the electric pump will be overloaded with the load, and the motor will be heated and easily damaged. Thanks to the birth of the pneumatic double diaphragm pump, we have solved this problem very well by using particles with adjustable flow rates and stopping automatically when the pipe is blocked. Pneumatic Double Diaphragm Pump Applications Diaphragm pumps have been invaded another market since its inception. Such as: paint, diaphragm pumps in the ceramic industry has occupied an absolute dominance, while in other industries, such as environmental protection, wastewater treatment, construction, sewage, fine chemicals is expanding its market share, and has other pumps irreplaceable Position. Pneumatic double diaphragm pump applications are: 1, due to the use of air as power, so the flow rate with the back pressure (outlet resistance) changes and automatically adjust, suitable for medium and high viscosity fluid. Centrifugal pump operating point is set on the basis of water, if used for slightly higher viscosity fluid, you need to support reducer or inverter, the cost has greatly improved, the same is true of the gear pump. 2, in a flammable and explosive environment with pneumatic pump reliable and low cost, such as fuel, gunpowder, explosives, because: First, the ground is not likely to spark; second, no heat during work, the machine is not Will overheat; thirdly, the fluid will not overheat because the diaphragm pump agitates the fluid to a minimum. 3, poor construction sites, such as construction sites, industrial and mining wastewater discharge, due to the impurities in the sewage and the composition of complex, easy to plug the pipeline, so the formation of the pump on the load is too high, the motor heat vulnerable. Pneumatic diaphragm pump through the particles and the flow rate can be adjusted, the pipeline automatically stop blocked to patency. 4, the other diaphragm pump is small and easy to move, do not need the foundation, accounting for the ground is extremely small, easy and economical installation. Can be used as mobile material transfer pump. 5, in a hazardous, corrosive material handling, diaphragm pump can be completely separated from the outside world. Pneumatic double diaphragm pump is in some experiments to ensure that no impurities contaminated raw materials. Can be used to transport the chemical properties of relatively unstable fluids, such as: photographic materials, flocculation and so on. This is because diaphragm pumps have low shear forces and little physical impact on the material. With the rapid development of science and technology, the future of double pneumatic diaphragm pump is also more bright. But this also requires the joint efforts of all circles.

Silicon Metal

Metal silicon, also known as crystalline silicon or industrial silicon, is primarily used as an additive for non-ferrous alloys. Metal silicon is produced from quartz and coke smelted in an electric furnace. The content of main component silicon is about 98% (In recent years, 99.99% of Si is contained in metallic silicon), and the remaining impurities are iron and aluminum. , calcium and so on.

Silicon Metal

Silicon Metal,Silicon Metal Lump,Silicon Metal Grades,Silicon Metal 553 Grade

Hwa Seng Resources (Hong Kong) Co., Limited , https://www.hwaseng-resources.com