Vertical loop ground source heat pump system highlights the advantages

1. Energy-efficient - heat pump operation, the energy input and output ratio of up to 1: 3 in the heating state, the cooling state of about 1: 5; even under partial load conditions, but also efficient operation, Operating costs only 40% to 60% of traditional central air conditioning.

2. Safe and reliable - without any explosion or burning hazards, underground heat exchangers using high-density polyethylene plastic pipe, life expectancy of up to 50 years, a few spare units to ensure the normal supply of air conditioning, easy maintenance, low cost.

3. To save investment - do not have to set up a large central main unit, saving room area; no boiler room, saving boiler room area, saving coal yard area, saving workers spending;

4 simple structure - no boiler room, no cooling tower, the system is simple and clear, easy and architectural decoration to meet the appearance of the building to maintain beauty; no outdoor parts, without defrosting.

5. Flexible partition - easy partition, flexible setting, simple adjustment of each partition, individual device failure, does not affect the use of other areas; non-stay area can be disabled at any time.

6. Household measurement - can be divided into household measurement accounting, billing reasonable and convenient.

7. Zero environmental pollution - no boiler room, there is no coal, oil pollution, but also to the sky blue; underground pipeline closed, without any groundwater pollution, protect the purity of the earth.

8. Use a wide range - both cooling and heating, without the need for central heating, without the necessary groundwater, without the need for a larger outdoor area, where the power to reach, can be applied.

Steel Coupling

Steel coupling is a piece of short pipe that is used to connect one pipe with another pipe, scope of application is also more widely, like agriculture, industry, construction and so on. There are socket welding couplings and threaded couplings, they are all High Pressure Forged Fittings. Pressure shall be CLASS3000, CLASS6000, CLASS900. The standard of these products are in compliance with ASME B16.11.

Socket welding coupling

Pipes are put into socket welding hole and welded. Because of this connection, installation cost is reduced.

Threaded coupling, the type of thread is NPT.

For Npt Coupling, the length of thread will be mentioned under the standard ASME B16.11.

Steel Coupling

Carbon Steel Coupling,Npt Coupling,Pipe Fitting Coupling

CANGZHOU HENGJIA PIPELINE CO.,LTD , https://www.hj-pipeline.com