2019年11月5日星期二

The plunger pump can be seen from where it needs to be repaired

We all know that in the industrial sector inside, hydraulic system is to play a very crucial role. After all, this system is a very large system, if it is a problem, then when used will bring great trouble. For the hydraulic system inside the pump there is a problem that needs to be solved, give the following to talk about the two most common problems. The first problem is the noise problem. Fault: there is the phenomenon of surface wool, there was a slight wear and tear, there is a bearing which appeared inside the fault (for example, there is air inside the system, the bearing operation is not very standardized, the use of the angle of deviation ) Solution: First pump to a fixed, are generally used in the surface. In the process of using the pump to pay attention to the installation process, the general control of the angle of about 45 degrees, so you can reduce the hydraulic pressure up and down the work of stress problems. And the best before the operation of bearing the problem fixed, the tubing to be cleaned for cleaning, the seal to be sealed, so that you can solve the problem of noise. The second problem is the problem of insufficient pressure. Failure: the problem of insufficient pressure, the blade may be equipped with anti-, or the contact is not good, so that the gap is too large, resulting in the pressure when the work of wear and tear, so there was a low speed Situation, let the pressure smaller. The solution is to cooperate with the pressure when the main time and direction, so that the blades can rotate normally, through the speed change to increase the pressure, so that the hydraulic pressure will be able to work quickly. This is the problem of not enough pressure to deal with. After all, hydraulic pressure is to complete this aspect.

UPVC stable doors is well known as Dutch Door which is made of original Unplasticized Polyvinyl Chloride that is also used for making UPVC Windows. It originates from Netherlands date back to 17th century. There are two main parts for Upvc Stable Doors. A casement door is on the top as a ventilation place and the entire door is used to resist wind, dust, rain, etc. Now UPVC Stable Doors are widely used as exterior doors. Both top and bottom parts of the entire door still have same functions. Multiple lock point system ensure security for all who choose UPVC stable doors. It is still a well welcomed and long lasting door.

UPVC Stable Doors

Upvc Stable Doors,White Upvc Stable Door,Upvc Stable Doors For Sale,Upvc Stable Doors Profile

Jinan Lumei Construction Material Co.,Ltd. , https://www.pvcuprofile.com

没有评论:

发表评论