American high-pressure diaphragm pump

High-pressure plunger diaphragm pump basic performance and uses are as follows:

performance:

First, by the eccentric shaft connected to the pump shaft, alternately pushing the rear three plunger, and then push the three front diaphragm, in order to form a high-pressure work. The maximum pressure up to 70kg, special custom models up to 170kg.

Second, the pressure and flow adjustment, is by connecting the motor inverter, by adjusting the motor speed to achieve.

Third, the mechanical part of the diaphragm is closed, immersed in the lubricant (similar to the car engine). Only the diaphragm and the flow path are in contact with the liquid material. The material and the mechanical part are completely out of contact, so liquids containing solid particles can be removed.

Fourth, the fragile parts only the diaphragm and the inlet and outlet of the closed valve, the replacement is very convenient, low cost.

use:

First, the most prominent feature of the pump is that it can transfer liquids containing solid particles under high pressure with the solid content up to 50%, which is suitable for pressure-type spray drying equipment. Pressure spray drying simply put, is the slurry drying process for the uniform particles. High-pressure pump material hit the top of the spray tower, spray out from the nozzle, drop the process of being hot air tower drying, falling in the bottom of the tower to form particles. Generally require the pressure of 30 ~ 40kg. After the electric drying products need to add grinding, the uneven particles, there are often large particles and dust. Dyes which are now exported abroad are required to be granulated products produced by spray drying due to environmental reasons.

Second, deep-controlled drilling, large machining centers, because of its cutting fluid containing impurities such as metal shavings, this pump can be used to spray cooling fluid.

Third, desalination of high pressure reverse osmosis filtration device for the liquid.

Ball Mill is a grinding device which is used to grind materials into fine powder with lining plate and grinding media inside the grinding drum, there are several kinds of ball mills: rod ball mill, batch ball mill, ceramic ball mill, Cement Ball Mill, and according to the working process, it can be divided into wet ball ball and dry ball mill, the wet ball mill is mainly used for the mineral processing plant such as iron ore processing plant, copper ore processing plant, chromite processing plant and the dry ball mill is mainly used for fine powder production plant such as quartz sand production plant, cement grinding plant, chemical fine powder grinding plant, etc, the feeding size usually need to be less than 25mm and the output fineness can be up to 350 mesh.

Ball Mill

Ball Mill,Cement Plant Ball Mill,Small Ball Mill,Ball Mill Machine

Henan Mingyuan Heavy Industrial Machinery Company Co., LTD. , https://www.heavyequipmentchina.com