Ground source heat pump system can be achieved on the building heating and cooling, but also for domestic hot water, a multi-purpose machine. A system can replace the original boiler plus cooler two sets of devices or systems. Compact system, eliminating the boiler room and cooling tower, saving construction space, but also conducive to the appearance of the building. Another notable feature of the ground-source heat pump system is that it greatly increases the utilization of primary energy and therefore has the advantage of being energy efficient. Ground source heat pump than the traditional air conditioning system operating efficiency of about 40-60% higher. In addition, the relatively constant temperature of the ground source makes the operation of the heat pump unit more reliable and stable. The maintenance cost of the entire system is also greatly reduced compared with the boiler-refrigerator system, which ensures the high efficiency and economy of the system. According to foreign experience, due to the low operation cost of ground-source heat pumps, the increased initial investment can be recovered within three to seven years. The average cost of the ground-source heat pump system during the entire service cycle will be lower than that of a traditional air-conditioning system. Ground source heat pump (underground heat pump system) a wide range of applications, low operating costs, energy saving and environmental benefits significantly.
Ground-source heat pump has been widely used in many countries in North America and Europe and is a mature technology. However, our country has just started the application of ground-source heat pump. Xiangtan City, Hunan Province took the lead in the successful application of the first case of the regional geothermal air-conditioning energy saving, environmental protection, low cost, safe and reliable advanced technology, which marks the application of geothermal air-conditioning technology in China has taken a big step forward. This is an environmentally friendly, energy-saving, economical, unprecedented results of heat pump technology.
The Tapered Roller Bearing belongs to the separation type bearing, and the inner and outer rings of the bearing have a conical raceway. This type of bearing is divided into single, double and four row tapered Roller Bearing according to the number of the roller. The single row Tapered Roller bearing can bear the radial load and the single direction axial load. When a bearing is subjected to a radial load, an axial force will be produced, so another bearing that can withstand the axial force of the opposite direction is needed to balance it.
There is a single row tapered roller bearing outer ring, the inner ring and a conical roller by maintaining a basket frame into the inner module. The outer ring can be separated from the inner ring assembly. According to the standard of the ISO tapered roller bearing dimension, any standard type tapered roller bearing outer ring or inner ring assembly should be able to achieve international interchangeability with the same type of outer ring or inner ring assembly. For example, the outer ring of the same type should conform to the ISO492 (GB307) rule besides the external dimension and tolerance. The conical angle of the inner ring assembly and the diameter of the component cone must also comply with the relevant provisions of the interchangeability.
Usually, the conical angle of the outer raceway of the single row tapered roller bearing is between 10 degrees ~19 degrees, and it can simultaneously bear the joint action of axial load and radial load. The larger the cone angle, the greater the ability to bear the axial load. The bearing of the big cone angle, the postposition code plus the B, the cone angle between 25 degrees ~29 degrees, can bear a large axial load. In addition, the single row tapered roller bearing can adjust the size of the clearance during the installation process.
The outer ring (or inner ring) of a double row tapered roller bearing is a whole. The two inner ring (or outer ring) has similar small end faces, and the middle has a spacer. The clearance is adjusted by the thickness of the spacer, and the pre interference of double row tapered roller bearings can also be adjusted by the thickness of the spacer.
The performance of the four row tapered roller bearing is basically the same as that of the double row tapered roller bearing, but the radial load of the double row tapered roller bearing is greater than that of the double row tapered roller bearing, and the limit speed is slightly lower, which is mainly used for heavy machinery.
Multi seal double, four row tapered roller bearings, ZWZ provides long life, multi seal double, four row tapered roller bearings. The new design of the bearing is personalized and the traditional design method of the fully sealed bearing is changed. A new seal structure combined with seal and dust-proof is adopted to improve the sealing effect and improve the sealing performance. Compared with open structure bearings, the life of multi seal double and four row tapered roller bearings increased by 20% to 40%, and the consumption of lubricants was reduced by 80%.
Tapered roller bearings are widely used in automobile, rolling mill, mine, metallurgy, plastic machinery and other industries.
Taper Bearing Tapered Roller Bearing,Durable Taper Bearing Tapered Roller Bearing,Cheap Taper Bearing Tapered Roller Bearing,Single Row Taper Roller Bearing
LUOYANG AUTO BEARING CO.,LTD , https://www.ballbearing.nl
没有评论:
发表评论